- CNC Machinery
- >
- Big Johnford CNC Turning Center Lathe 80" centers!!
Big Johnford CNC Turning Center Lathe 80" centers!!
SKU:
$54,500.00
$16,350.00
$16,350.00
Unavailable
per item
Minimum deposit credit purchase to make an offer $16350
Reference # TahaFazalCPKJuly13-2-49PM
OFFERING HERE IS (1) JOHNFORD ST-80B CNC 2-AXIS TURNING CENTER. BUILD DATE 12/1999. INSTALLED NEW 2000. ONLY HAS 8,900 CUTTING TIME ON THE CLOCK. BEAUTIFUL CONDITION WITH STEADY REST, 2-SPEED GEAR BOX. 18" 3-JAW HYDRAULIC CHUCK, LOADED ONTO TRUCK AT NO ADDITIONAL COST. INSPECT UNDER POWER IN THE DETROIT, MI AREA. THE MACHINE HAS ONLY 8,995 CUT TIME HOURS ON IT. THE SPINDLE HAS NEW SPINDLE BEARING INSTALLED IN 2014 WITH LITTLE USE SINCE.
WE CAN MAKE YOUR ARRANGEMENTS FOR TUCKING THE MACHINE ANYWHERE IN THE LOWER 48 USA. BUYER PAYS THE FREIGHT.
MACHINE SOLD WITHOUT WARRANTY OF ANY KIND. "AS IS" YOUR INSPECTION UNDER POWER IS SUGGESTED AND WELCOME. WE DO NOT ACCEPT RETURNS. WE LOAD ONTO YOUR TUCK FOR FREE IF THE MACHINE IS IN OUR WAREHOUSE.
LIVE DEMO - CUT/PASTE LINK BELOW TO BROWSER
SPECIFICATIONS:
Swing over bed: 36.220"
Swing over cross slide: 27.57"
Distance between centers: 80"
Chuck size: 18"
2-speed gear box
Bar capacity: 4.5"
Spindle nose: A2-11
Spindle speed: 1,624 RPM max
Spindle motor: 35/30 HP
Number of tools: (12) 6 -ID and 6 OD
X axis travel: 15.74" ,
Z axis travel: 78.74"
Rapid traverse: X=393 IPM Y=590 IPM
Tailstock body travel: 66.59"
Tailstock quill travel: 5.9"
Tailstock quill diameter: 7.78"
Servo motors X & Y axes: 6 hp each axis
Weight: 34,000 lbs approx
EQUIPPED WITH:
STEADY REST, (6) I.D. HOLDERS ON TURRET, BOOKS AND MANUALS, FULL ENCLOSURE, COOLANT SYSTEM, CHIP CONVEYOR,
ALL NECESSARY MOTOR AND CONTROLS, 18" HYDRAULIC CHUCK, TAILSTOCK, REBUILT SPINDLE IN 2014
Please note you are paying for a deposit for a used Equipment listing. After you have signed our terms and conditions that will be emailed you can clarify the exact offer amount you wish to make and we will present the offer (provided it complies with our terms and conditions and you have signed our terms and
conditions) for you to the seller. Please Note until the buyers terms and conditions are signed your offer will not be presented to the seller/equipment owner. In the event you change your mind and/or do not sign our terms and conditions, you will be charged a four hundred and ninety five dollar fee or fifty percent of the value of the credit on file whichever is more for access you have had to our national listing service and you will be given ninety days of access from your deposits original submission date, the national listing service fee may be deducted from your deposit credit or paid separately (at our discretion). (You can request references via a link at the bottom).No national listing service fee will be charged to you as long as you keep your full deposit on file or buy any piece of equipment that you list as wanting to buy on our terms and conditions agreement with us (Even if it's found from another vendor or independent seller not yet listed on this site as long as you have signed our terms and conditions agreement and that equipment was listed on it).
Please note the national listing service fee is deemed earned immediately, this fee is only voided if you sign our terms and conditions agreement and successfully purchase a piece of equipment you have listed on that agreement within 1 year. You can also get the terms and
conditions free of charge by being a member of our VIP Service here http://www.buytanningsalons.com/ways-to-shop.html
In the event any of your offer/offers are not accepted please email us at sales@BuyTanningSalons.com to request instructions to get any remaining credit balance to you, a few questions will be required to answer for verification reasons. All credit balances will expire 1 year unless they are used or requested back .
You can request references here http://www.buytanningsalons.com/requestrefrences.html
Reference # TahaFazalCPKJuly13-2-49PM
OFFERING HERE IS (1) JOHNFORD ST-80B CNC 2-AXIS TURNING CENTER. BUILD DATE 12/1999. INSTALLED NEW 2000. ONLY HAS 8,900 CUTTING TIME ON THE CLOCK. BEAUTIFUL CONDITION WITH STEADY REST, 2-SPEED GEAR BOX. 18" 3-JAW HYDRAULIC CHUCK, LOADED ONTO TRUCK AT NO ADDITIONAL COST. INSPECT UNDER POWER IN THE DETROIT, MI AREA. THE MACHINE HAS ONLY 8,995 CUT TIME HOURS ON IT. THE SPINDLE HAS NEW SPINDLE BEARING INSTALLED IN 2014 WITH LITTLE USE SINCE.
WE CAN MAKE YOUR ARRANGEMENTS FOR TUCKING THE MACHINE ANYWHERE IN THE LOWER 48 USA. BUYER PAYS THE FREIGHT.
MACHINE SOLD WITHOUT WARRANTY OF ANY KIND. "AS IS" YOUR INSPECTION UNDER POWER IS SUGGESTED AND WELCOME. WE DO NOT ACCEPT RETURNS. WE LOAD ONTO YOUR TUCK FOR FREE IF THE MACHINE IS IN OUR WAREHOUSE.
LIVE DEMO - CUT/PASTE LINK BELOW TO BROWSER
SPECIFICATIONS:
Swing over bed: 36.220"
Swing over cross slide: 27.57"
Distance between centers: 80"
Chuck size: 18"
2-speed gear box
Bar capacity: 4.5"
Spindle nose: A2-11
Spindle speed: 1,624 RPM max
Spindle motor: 35/30 HP
Number of tools: (12) 6 -ID and 6 OD
X axis travel: 15.74" ,
Z axis travel: 78.74"
Rapid traverse: X=393 IPM Y=590 IPM
Tailstock body travel: 66.59"
Tailstock quill travel: 5.9"
Tailstock quill diameter: 7.78"
Servo motors X & Y axes: 6 hp each axis
Weight: 34,000 lbs approx
EQUIPPED WITH:
STEADY REST, (6) I.D. HOLDERS ON TURRET, BOOKS AND MANUALS, FULL ENCLOSURE, COOLANT SYSTEM, CHIP CONVEYOR,
ALL NECESSARY MOTOR AND CONTROLS, 18" HYDRAULIC CHUCK, TAILSTOCK, REBUILT SPINDLE IN 2014
Please note you are paying for a deposit for a used Equipment listing. After you have signed our terms and conditions that will be emailed you can clarify the exact offer amount you wish to make and we will present the offer (provided it complies with our terms and conditions and you have signed our terms and
conditions) for you to the seller. Please Note until the buyers terms and conditions are signed your offer will not be presented to the seller/equipment owner. In the event you change your mind and/or do not sign our terms and conditions, you will be charged a four hundred and ninety five dollar fee or fifty percent of the value of the credit on file whichever is more for access you have had to our national listing service and you will be given ninety days of access from your deposits original submission date, the national listing service fee may be deducted from your deposit credit or paid separately (at our discretion). (You can request references via a link at the bottom).No national listing service fee will be charged to you as long as you keep your full deposit on file or buy any piece of equipment that you list as wanting to buy on our terms and conditions agreement with us (Even if it's found from another vendor or independent seller not yet listed on this site as long as you have signed our terms and conditions agreement and that equipment was listed on it).
Please note the national listing service fee is deemed earned immediately, this fee is only voided if you sign our terms and conditions agreement and successfully purchase a piece of equipment you have listed on that agreement within 1 year. You can also get the terms and
conditions free of charge by being a member of our VIP Service here http://www.buytanningsalons.com/ways-to-shop.html
In the event any of your offer/offers are not accepted please email us at sales@BuyTanningSalons.com to request instructions to get any remaining credit balance to you, a few questions will be required to answer for verification reasons. All credit balances will expire 1 year unless they are used or requested back .
You can request references here http://www.buytanningsalons.com/requestrefrences.html